Table of Contents
Advertisement
A.3 Debugging Tools
A.3.1 Hardware (1/2)
(1) When using in-circuit emulator IE-78K0-NS
Note
IE-78K0-NS
This in-circuit emulator is used to debug hardware and software when developing application
In-circuit Emulator
systems using the 78K/0 Series. It supports the integrated debugger (ID78K0-NS). This
emulator is used in combination with a power unit, an emulation probe, and an interface
adapter for connection to a host machine.
IE-70000-MC-PS-B
This is an adapter for power supply from a receptacle of 100-V to 240-V AC.
Power Unit
Note
IE-70000-98-IF-C
This adapter is required when using the PC-9800 Series computer (except notebook type) as
Interface Adapter
the IE-78K0-NS host machine.
Note
IE-70000-CD-IF
These PC card and interface cable are required when using a PC-9800 Series notebook as the
PC Card Interface
IE-78K0-NS host machine.
Note
IE-70000-PC-IF-C
This adapter is required when using an IBM PC/AT or compatible as the IE-78K0-NS host
Interface Adapter
machine.
Note
IE-780974-NS-EM1
This board is used to emulate the peripheral hardware that is peculiar to the device. This
Emulation Board
board is used in combination with an in-circuit emulator.
EP-80GF-NS
This probe is used to connect an in-circuit emulator and target system. It is for 80-pin plastic
Emulation Probe
QFPs (GF-3B9 type).
TGF-080RAP
This conversion adapter is used to connect a target system board designed to allow
Conversion Adapter
mounting of an 80-pin plastic QFP (GF-3B9 type) and the EP80GF-NS.
(Refer to Figure A-2)
Note Under development
Remarks 1. TGF-080RAP is a product of TOKYO ELETECH Corporation.
For inquiry: DAIMARU KOUGYOU Corporation
Phone: +81-3-3820-7112 Tokyo Electronic Components Division
+81-6-244-6672 Osaka Electronic Components Division
2. The TGF-080RAP is sold in single units.
284
APPENDIX A DEVELOPMENT TOOLS
Advertisement
Table of Contents
