Debugging Tools (Hardware) - NEC mPD178054 Series User Manual

A.5 Debugging Tools (Hardware) (1/2)
(1) When using the in-circuit emulator IE-78K0-NS
IE-78K0-NS
In-circuit emulator
IE-78K0-NS-PA
Performance board
IE-78K0-NS-A
In-circuit emulator
IE-70000-MC-PS-B
Power supply unit
IE-70000-98-IF-C
Interface adapter
IE-70000-CD-IF-A
PC card interface
IE-70000-PC-IF-C
Interface adapter
IE-70000-PCI-IF-A
Interface adapter
IE-178054-NS-EM1
Emulation board
NP-80GC
Emulation probe
EV-9200GC-80
Conversion socket
(Refer to Figures
A-2, A-3)
Remarks 1. NP-80GC is a product of Naito Densei Machida Mfg. Co., Ltd.
Contact: +81-45-475-4191 Naito Densei Machida Mfg. Co., Ltd.
2. EV-9200GC-80 is sold in five-unit sets.
APPENDIX A DEVELOPMENT TOOLS
The in-circuit emulator serves to debug hardware and software when developing
application systems using a 78K/0 Series product. It corresponds to integrated debugger
(ID78K0-NS). This emulator should be used in combination with power supply unit,
emulation probe, and interface adapter which is required to connect this emulator to the
host machine.
This board is used for extending the IE-78K0-NS functions, and is used connected to
the IE-78K0-NS. With the addition of this board, the addition of a coverage function,
enhancement of tracer and timer functions, and other such debugging function
enhancements are possible.
In-circuit emulator that combines IE-78K0-NS and IE-78K0-NS-PA
This adapter is used for supplying power from a receptacle of 100 to 240 V AC.
This adapter is required when using the PC-9800 series computer (except notebook
type) as the IE-78K0-NS host machine (C bus compatible).
This is PC card and interface cable required when using the notebook-type computer
as the IE-78K0-NS host machine (PCMCIA socket compatible).
This adapter is required when using the IBM PC compatible computers as the IE-78K0-
NS host machine (ISA bus compatible).
This adapter is required when using a PC with a PCI bus as the IE-78K0-NS host
machine.
This board emulates the operations of the peripheral hardware peculiar to a device. It
should be used in combination with an in-circuit emulator.
This probe is used to connect the in-circuit emulator to the target system and is designed
for 80-pin plastic QFP (GC-8BT type).
This conversion socket connects the NP-80GC to the target system board designed to
mount an 80-pin plastic QFP (GC-8BT type).
User's Manual U15104EJ2V0UD
257