Removing The Thrust Unit - Canon Finisher-AK1 Service Manual

4
Parts Replacing and Cleaning > Saddle Stitcher Assembly > Removing the Thrust Unit > Procedure

Removing the Thrust Unit

■ Preparation
1) Open the Front Cover.
2) Pull out the Saddle Unit.
3) Remove the Saddle Inner Cover (Lower).(Refer to page 4-89)
■ Procedure
1) Remove the Saddle Stitcher Controller PCB Cover [1].
• 6 Screws [2]
[1]
4 Parts Replacing and Cleaning > Saddle Stitcher Assembly > Removing the Thrust Unit > Procedure
[2]
[2]
F-4-229
2) Free the harness [1] from the Harness Guide [2].
• 12 Connectors [3]
[1] [3]
[3]
[2] [3]
[3]
[3]
F-4-230
4-95
4-95