Figure 4-5 Installing A Removable Media Drive; Figure 4-6 Attaching The Cables To A Removable Media Drive - Silicon Graphics 320 Owner's Manual

Power cable
Ribbon cable
36 Chapter 4
8. Slide the drive into the drive bay until it snaps into place, as
shown in Figure 4-5.
Figure 4-5 Installing a Removable Media Drive
9. Connect the power and ribbon cables, as shown in Figure 4-6. To
see a more detailed diagram of the correct ribbon cabling for the
drives, refer to Figure 4-1.
Figure 4-6 Attaching the Cables to a Removable Media Drive