Figure 5-4 Installing A Blank Panel In A Pci Slot - Silicon Graphics 320 Owner's Manual

6. If you are not installing another card in the slot, install a blank
panel, as shown in Figure 5-4.
Position the panel over the slot.
Insert and tighten the screw.
Installing a Blank Panel in a PCI Slot
Figure 5-4
7. Replace the side cover. For detailed instructions, see "Replacing
the Side Cover" on page 21.
8. Reattach the power cord.
9. Power up the system. For detailed instructions, see "Turning On
the System" on page 11.
Option Cards 59