Manufacturer's Declaration Of Conformity; Fcc Class B Conformance - Silicon Graphics 320 Owner's Manual

122 Appendix D
You need to know the CMN and series numbers for downloading the
Manufacturer's Declaration of Conformity from the World Wide Web.
You also need to know the CMN number to determine the class of
your Silicon Graphics 320 workstation.

Manufacturer's Declaration of Conformity

A "Manufacturer's Declaration of Conformity" is available on the
World Wide Web. Look on your system (regulatory) label on the rear
of your workstation to determine your CMN (model) number, which
you need to identify your Declaration of Conformity, and to find the
Series Number of your processor.
To locate the information on the World Wide Web, enter the following
in your Web browser location window:
http://www.sgi.com/compliance/index.html

FCC Class B Conformance

The following information is provided about the device covered in
this manual in compliance with FCC regulations.
Trade Name
Product
Model Number
Date of Conformance
Responsible Party
Address
Telephone
This equipment complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
Silicon Graphics, Inc.
Windows NT workstation
CMNB021
January 1999
Silicon Graphics, Inc.
2011 N. Shoreline Blvd.
Mountain View CA 94039
(650)960-1980