Setting Up the System
After unpacking all the parts and checking your shipment, you are
ready to set up the workstation. Refer to the installation poster that
ships with your Silicon Graphics 320 workstation or to the instructions
on the following pages. You can also use Figure 1-2 to help you
identify the ports on the back of the system.
Display option slot
Ethernet
IEEE 1394 (2)
USB (2)
Serial
Parallel
Monitor
Speakers/headphones
Microphone
Analog line in/out
(L-white, R-red)
Composite video in/out
(yellow)
Svideo in/out
Figure 1-2
In
Out
L
R
Back View of the System (Ports Labeled)
Serial number
Fan
Voltage switch
Power outlet
Fan
Latch
Lock
PCI option slots
Getting Started 3