Important Safety Information - Raven DirecSteer Calibration And Operation Manual

Table of Contents

Advertisement

Important Safety Information

Follow the operation and safety instructions included with the implement and/or controller
and read this manual carefully before installing, servicing, or operating this Raven system.
Park the machine where the ground is level, clean, and dry.
l
Bleed pressure from the hydraulic system and leave the machine turned off for the dur-
l
ation of the installation or maintenance process.
Follow the operation and safety instructions included with the implement and/or controller.
Before installing or operating this Raven system, review and understand the information
presented on this site.
Failure to follow safety instructions may lead to equipment damage, personal injury, or
l
death.
Review equipment operation with your local dealer and follow all safety information
l
presented on this site.
Contact a local Raven dealer for assistance with any portion of the installation, service,
l
or operation of Raven equipment.
Follow all safety labels affixed to system components. Be sure to keep safety labels in
l
good condition and replace any missing or damaged labels. Contact a local Raven
dealer to obtain replacements for safety labels.
Observe the following safety measures when operating the implement after installing this
Raven system:
Do not operate this Raven system or any agricultural equipment while under the influ-
l
ence of alcohol or an illegal substance.
NOTICE
Important Safety Information
1

Advertisement

Table of Contents
loading

Table of Contents