Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Raven Manuals
  4. Farm Equipment
  5. SmarTrax
  6. Installation manual

Raven SmarTrax Installation Manual

Hagie sts 10/12
Hide thumbs Also See for SmarTrax:

Advertisement

Quick Links

Download this manual
SmarTrax™ Installation Manual
Hagie STS 10/12

Advertisement

loading

Related Manuals for Raven SmarTrax

Summary of Contents for Raven SmarTrax

  • Page 1 SmarTrax™ Installation Manual Hagie STS 10/12...
  • Page 2 GPS, GNSS, SBAS, etc.). Therefore, Raven Industries cannot guarantee the accuracy, integrity, continuity, or availability of these services and cannot guarantee the ability to use Raven systems, or products used as components of systems, which rely upon the reception of these signals or availability of these services.
  • Page 3 H A P T E R N T RO D U C T I O N Congratulations on your purchase of the Raven SmarTrax system! This system is designed to provide cutting-edge, hands-free steering of your machine via GPS coordinates.

  • Page 4: Basic Kit

    Hagie STS 10/12 SmarTrax Installation Manual Basic Kit Below you will see the kit contents that you should have received with this SmarTrax Kit. Contents Hagie STS 10/12 SmarTrax Kit Contents Quantity Item Description Part Number SENSOR, YAW 063-0172-684 CABLE, HYDRAULIC SOLENOID / OVERRIDE 115-0171-775 WELDMENT, BRKT., UNIVERSAL HYD.

  • Page 5: Electrical Safety Requirements

    Caution must be exercised. Any work carried out on the hydraulic system must be performed in accordance with the machine manufacturers’s approved maintenance instructions. Raven Industries recommends that appropriate protective equipment be worn when working on the hydraulic system. Objects or materials that are able to bypass the machine’s hydraulic filtration system will adversely reduce...
  • Page 6 Hagie STS 10/12 SmarTrax Installation Manual Contacting We welcome your feedback about this manual. If you have any comments or suggestions for improvement, please let us know by contacting our Raven Customer Support Center by any of the following methods: Industries •...
  • Page 7 Manual #016-0190-029 H A P T E R OUNTING THE UNIVERSAL RACKET AND ALVE 1. Using the supplied 3/8” bolts, washers, lock washers, and nuts, mount the valve to front right corner of the cab floor. Hydraulic Valve Pressure Switch Front of Machine Drill Mounting...
  • Page 8 Hagie STS 10/12 SmarTrax Installation Manual Notes:...
  • Page 9 1. Attach the supplied 3/4” 90° fittings to ‘P’ and ‘EF’ ports on valve. 2. Remove original pressure hose from steering orbital and connect directly to ‘P’ port on SmarTrax Valve. 3. Attach supplied excess flow hose (P/N 214-1000-245) to ‘EF’ port on valve.
  • Page 10 Hagie STS 10/12 SmarTrax Installation Manual Installing Left, Right and Tank Supplied Tank Hose Hoses Supplied Left Steer Hose Supplied Original Left Excess Steer Hose Flow Hose Supplied Temporarily Disconnect for Access Right Steer Hose 1. Remove original right steer hose (fitting in orbital may need to be removed for clearance to left steer port).
  • Page 11 Manual #016-0190-029...
  • Page 12 Hagie STS 10/12 SmarTrax Installation Manual Notes:...

  • Page 13: Installation

    • The sensor is not weatherproof. Mount the sensor inside of the machine’s cab or drivers compartment. • Mount the sensor to a flat surface parallel to the ground with the Raven logo facing up. The floor of the cab is generally ideal.
  • Page 14 See the Mounting the Yaw Sensor section on the previous page for mounting location considerations. • Connect the supplied sensor cable to the Yaw Sensor and to the Yaw Sensor connector on the SmarTrax Interface cable.

  • Page 15: Start-Up Procedures

    Manual #016-0190-029 H A P T E R TART ROCEDURES After installing the SmarTrax system on your machine, always follow these start-up procedures. • Turn the wheels fully from side to side numerous times to remove air from the hydraulic system.
  • Page 16 Hagie STS 10/12 SmarTrax Installation Manual Notes:...
  • Page 19 How Can I Get Service? Bring the defective part and proof of purchase to your Raven dealer. If your dealer agrees with the warranty claim, the dealer will send the part and proof of purchase to their distributor or to Raven Industries for final approval.
  • Page 20 P.O. Box 5107 Fax: 605-331-0426 Sioux Falls, SD 57117-5107 www.ravenprecision.com atdinfo@ravenind.com Notice: This document and the information provided are the property of Raven Industries, Inc. and may only be used as authorized by Raven Industries, Inc. All rights reserved under copyright laws.