Table of Contents
Advertisement
CHAPTER
1
Read this manual and the operation and safety instructions included with your implement and/or controller
carefully before installing the SC1™ HD system.
• Follow all safety information presented within this manual.
• If you require assistance with any portion of the installation or service of your Raven equipment, contact your
local Raven dealer for support.
• Follow all safety labels affixed to the SC1 HD system components. Be sure to keep safety labels in good
condition and replace any missing or damaged labels. To obtain replacements for missing or damaged safety
labels, contact your local Raven dealer.
When operating the machine after installing SC1 HD, observe the following safety measures:
• Be alert and aware of surroundings.
• Do not operate SC1 HD or any agricultural equipment while under the influence of alcohol or an illegal
substance.
• Remain in the operator's position or a safe working distance away from the booms at all times when SC1 HD is
engaged.
• Disable SC1 HD when exiting from the operator's seat and machine.
• Do not drive the machine with SC1 HD enabled on any public road.
• Determine and remain a safe working distance from other individuals. The operator is responsible for disabling
SC1 HD when the safe working distance has diminished.
• Ensure SC1 HD is disabled prior to starting any maintenance work on SC1 HD or the machine.
• When starting the machine for the first time after installing SC1 HD, be sure that all persons stand clear in case
a hose has not been properly tightened.
• The machine must remain stationary and switched off, with the booms unfolded and supported, during
installation or maintenance.
016-5032-107 Rev. A
I MPORTANT SAFETY
C H A P T E R 1
INFORMATION
NOTICE
WARNING
1
Advertisement
Table of Contents
