Charging The Optional Battery Pack With The Printer; Installing And Removing The Optional Battery Pack - SATO TH2 Series Operator's Manual

2.4 CONNECTIONS (cont'd)

2.4.7 Charging the optional battery pack with the printer

Caution
The power cable and the AC adapter provided with this printer are for use with this printer only.
They cannot be used with other electrical devices.
1.
Insert the DC power cable into the DC IN input connector.
2.
Connect the power cord to the AC adapter and plug it to
the outlet. When charging begins, the CHARGE LED
lights. When charging is complete, the CHARGE LED
turns off (fully charged).
Charging time
It takes about 6 hours for the CHARGE LED to turn off
when charging a completely depleted battery.
2.4.8 Installing and removing the optional battery
pack
1.
Open the battery cover.
2.
Insert the battery pack, then close the battery cover.
Insert the battery pack with the connector side toward
the printer.
TH2 Series Operator Manual
Section 2: Installation
AC adapter
Battery pack
DC input
connector
Terminal side
Page 2-11