Rep 7.2 Rewind Gear And Rewind Internal Gear - Xerox 8825 Service Manual

REP 7.2 Rewind Gear and Rewind Internal Gear

Parts List on PL 7.3
Switch off the Main Power Switch. Disconnect the Power Cord.
NOTE: All three Rewind Gears and Rewind Internal Gear Assemblies are removed the same
way.
Removal
1. Pull out the Media Supply Drawer.
2. Remove the roll of media.
3. (Figure 1): Remove the Rewind Gear and the Rewind Internal Gear.
8825/8830 Printer
WARNING
3
Remove the E-ring
2
Remove the Rewind
Internal Gear
Figure 1 Removing the Rewind Gears
01/02
4-9
4
Remove the
Rewind Gear
1
Remove the E-ring
Repairs and Adjustments
REP 7.2