Configuring Snmp Settings - Codec Tieline ViA User Manual

210 ViA User Manual v3
2. Tap to expand the IP Options menu and then tap IP Via Setup
3. Tap to select an interface to configure. Note: A LAN interface displayed in yellow text is
enabled, but a network cable is not attached. An interface in red text is disabled, e.g. Wi-Fi
in the following image.
4. Tap to select the default interface to use.

31.16 Configuring SNMP Settings

The codec supports Simple Network Management Protocol (SNMP) for managing devices on IP
networks.
Description of SNMP Settings in the Codec
Features
Read
Community
Read/Write
Community
Codec Name
Operation Button Descriptions
Only SNMP provides two types of access, namely Read-Only access and
Read-Write access. The Read Only Community identifier allows
Read Only level access.
The Read/Write Community identifier allows Read/Write level
access.
A user-specified alphanumeric identifier which may be used by third-
party SNMP software to identify a device. The device name
corresponds
2.system.sysName" SNMP attribute and is completely independent
of DNS, NIS, WINS or other device naming and identification
schemes, though convention is to use the device's fully-qualified
domain name.
to the ".iso.org.dod.internet.mgmt.mib-
.
© Tieline Research Pty. Ltd. 2020