Codec Tieline ViA User Manual page 55

Audio Stream Settings
1. Press the HOME
2. Tap the Audio Stream name to display stream settings.
3. Tap Stream Name to edit the default name.
4. Tap Caller ID to enter an identifier for inbound calls on Tieline codecs.
5. Tap Routing Type to configure routing options as per the table below:
Routing Type Options:
Default
Deterministic
Line Hunt
6. Tap G3 Profile to configure profile settings when dialing a Tieline G3 Codec.
Important Note: The G3 profile setting supports maintaining specific G3 codec settings
when answering a call from a G5 codec.
7. Tap G3 Channel when connecting to a G3 codec in dual mono mode. This setting lets you
configure which G3 channel (encoder) is used when the G3 codec receives a call from this
codec. E.g. Channel 1 will route the incoming stream to Encoder 1 on the G3 codec and
Channel 2 will route the incoming stream to Encoder 2 on the G3 codec.
© Tieline Research Pty. Ltd. 2020
button to return to the Home screen, then tap Connections
No Dial Route or Answer Route is configured. An incoming call will be
routed to an audio stream on a first-come, first-served basis in a multi-
stream program. Note: By default IP streams are routed using audio
ports.
Select a Dial Route or Answer Route to configure deterministic routing
of multiple audio streams using transports like ISDN or POTS. Use of
Dial and Answer Routes is not usually necessary over IP because
dedicated ports or Line Hunt mode call answering is employed. However
dial routes can be used over IP when a single stream on an answering
codec answers using POTS and/or ISDN connections, as well as IP. This
effectively creates an answering group using different transports. See
Configuring ISDN Answering
information.
Create line hunt groups for multiple incoming callers on a first come, first
served basis. This is ideal for separating groups of inputs and outputs
between different studios or stations. See
more information.
1. Auto: The codec will dial the G3 codec and connect in mono or stereo. Note: This
is overridden in a ViA codec when a G3 Main + IFB use-case is configured.
2. Dual Program: This allows the codec to dial a G3 codec with a Dual Program
profile loaded and support two simultaneous mono connections.
3. Runtime: The G3 codec will retain runtime settings when answering a call from a
G5 codec.
4. Custom: The G3 codec will load a specified profile, e.g. profile 6, which is the first
custom profile number.
ViA User Manual v3
or Configuring POTS Answering
Line Hunt Call Answering
55
.
for more
for