Codec Tieline ViA User Manual page 325

This setting is for compatibility with the Dual Mono profile in Tieline Commander G3 and
i-Mix G3 codecs. It is designed to configure routing of the audio stream to a specific G3
codec channel consistently.
5. This audio stream connection in the wizard will allow the codec to dial and connect the first
audio stream of the two audio streams being configured. Enter the name of the connection in the
text box, then click Next.
6. Configure the transport settings for the connection, then click Next. For SIP connections see
Configuring
in separate packets using any algorithm.
Important Note:
· If you select Sessionless as the Session Protocol select UDP/IP +RTP for RFC-
compliant IP streaming.
· See
Relays and RS232 Data
7. Configure destination codec dialing and encoding settings. Enter an IP address, or click the
Address Book
For IP connections configure the IP address, ports, and then specify which streaming
interface is used to dial this connection, e.g. Primary (port LAN1) or Secondary (port
LAN2). Note: By default Any will select LAN1 if it is available and LAN2 if it is unavailable.
© Tieline Research Pty. Ltd. 2020
1. Auto (default): The answering codec will route incoming calls on a first come first
served basis.
2. Channel 1: The answering codec will always route incoming calls to codec
Channel 1 (left output).
3. Channel 2: The answering codec will always route incoming calls to codec
Channel 2 (right output).
SIP. Note: Select Enable Auxiliary Data to enable synchronized out-of-band data
RS232 Data Configuration
button to select a TieLink contact.
for detailed information on RS232 data and see
for more information on relay operations.
ViA User Manual v3
Enabling
325