Codec Tieline ViA User Manual page 261

Reconfigure Default Primary, Secondary and Tertiary Interfaces
It is possible to reconfigure the default Primary (LAN1), Secondary (LAN2) and Tertiary (Wi-
Fi) interfaces in the codec. As an example, you may want to select Primary as the dialing
interface in a program and then copy this program onto multiple codecs. However, the actual
primary interface used at each location can vary for each codec. For one codec it may be a LAN
interface and for another it may be a USB cellular interface. This allows you to configure site-
specific settings to suit the available network interfaces at different remote locations.
1. Open the HTML5 Toolbox Web-GUI and click Settings and then click IP Via Mapping
2. Click the drop-down arrow for each interface to select the preferred default setting.
3. Click Save to store the configuration.
Important Note: Fuse-IP cannot be configured as a default Primary, Secondary or
Tertiary Via.
Configure Firewall Settings
The Firewall menu can be used to enable or disable a range of firewall-related network services, or
limit ping to only work in a local subnet.
1. Open the HTML5 Toolbox Web-GUI and click Settings at the top of the screen, then click
Options to display the Options panel.
2. Select Firewall and then click Edit to adjust settings. Click Save to store new
configuration settings.
© Tieline Research Pty. Ltd. 2020
to open this panel.
ViA User Manual v3 261