Codec Tieline ViA User Manual page 310

310 ViA User Manual v3
Important Notes on G3 Profile Settings:
The G3 profile setting supports maintaining specific G3 codec settings when answering a
call from a G5 codec.
1. Auto: The codec will dial the G3 codec and connect in mono or stereo. This is
2. Dual Program: This allows the codec to dial a G3 codec with a Dual Program
3. Runtime: The G3 codec will retain runtime settings when answering a call from a
4. Custom: The G3 codec will load a specified profile, e.g. profile 6, which is the first
Important Notes on G3 Channel Settings:
This setting is for compatibility with the Dual Mono profile in Tieline Commander G3 and
i-Mix G3 codecs. It is designed to configure routing of the audio stream to a specific G3
codec channel consistently.
1. Auto (default): The answering codec will route incoming calls on a first come first
2. Channel 1: The answering codec will always route incoming calls to codec
3. Channel 2: The answering codec will always route incoming calls to codec
5. This audio stream connection in the wizard will allow the codec to dial. Enter the connection
name in the text box, then click Next.
6. Configure the transport settings for the connection, then click Next. For SIP connections see
Configuring SIP. Note: Select Enable Auxiliary Data to enable synchronized out-of-band data
in separate packets using any algorithm.
Important Note: See
and see
overridden in a Merlin or Merlin PLUS codec when a G3 Main + IFB use-case is
configured.
profile loaded and support two simultaneous mono connections. Note: When
connecting in dual mono (2 x Mono Peer-to-Peer) mode to a G3 codec over IP both
audio streams must encode using the same algorithm and sample rate or the G3
codec will not connect.
G5 codec.
custom profile number.
served basis.
Channel 1 (left output).
Channel 2 (right output).
RS232 Data Configuration
Enabling Relays and RS232 Data
for detailed information on RS232 data
for more information on relay operations.
© Tieline Research Pty. Ltd. 2020