Codec Tieline ViA User Manual page 331

4 Enable Automatic Failback
5 Stable Time
6 Maximum Retries
7 Time Frame
2. Enter a name for the backup connection and click Next.
3. Click Next to continue through the wizard and configure the backup connection in a similar
manner to how you configured the primary connection.
After configuring these settings there are 2 options:
4. To configure new stream level rules click the drop-down arrow and select the preferred option
from those available. Click the blue Plus symbol
symbol
Important Note: Connection-related rules are not displayed in Answer only audio
streams.
5. Click Next to configure the second audio stream.
Configure the Second Peer-to-Peer Audio Stream
1. Enter a Stream Name, then add a Caller ID and configure the codec to dial, answer or dial and
answer. Then click Next. Select Advertise On TieLink if configuring answering audio streams
that will be used as dialing destinations in TieLink Traversal Server Contact Lists. For more
details see
© Tieline Research Pty. Ltd. 2020
i. Click Next to configure rules options.
ii. Click Next Stream to configure the second audio stream.
to remove a rule.
Configuring TieLink Settings.
confirm connectivity
Select the check-box to fail back to a higher priority
connection when failback parameters are met
The amount of time a primary connection must remain
stable before attempting to fail back from the backup
connection
The maximum number of fail back retries a codec can try
before ending fail back attempts
The time frame used to measure the number of fail back
retries attempted
to add a new rule and click the Minus
ViA User Manual v3 331