Codec Tieline ViA User Manual page 49

5. If required, tap Transport and select IP > Tieline Codecs if ISDN or POTS is the currently
configured transport.
Note: Select SIP instead of Tieline Codecs when dialing non-Tieline codecs and see
SIP Peer-to-Peer
connection over networks supporting this connection method.
6. To connect very simply using default settings navigate to the Connections screen.
7. Tap Press to Edit Destination and then enter the IP address of the destination codec being
dialed, or tap the Dial History
Done in the top right-hand corner of the TOUCH SCREEN.
Note: Tap IP to toggle and display the Address Book
Traversal Server contact list destination if this is available. For more details on TieLink see
TieLink
8. Tap Connect
The Status Bar turns green when the codec is connected.
© Tieline Research Pty. Ltd. 2020
to configure SIP connections. Select Sessionless to dial a sessionless IP
Configuration.
or press the CONNECT
symbol to select a previously dialed number. Then tap
symbol, then tap to select a TieLink
button to dial the destination codec.
ViA User Manual v3 49
Dialing