Table of Contents
Advertisement
156
ViA User Manual v3
Dialing Method (Affects Dialing only)
Use this menu to select Tone (DTMF) or Pulse dialing over POTS Codec connections. Tone
dialing (default) is used always when the Answer Mode is Analog Phone.
Dial Tone Detect (Affects Dialing only)
There are two settings in this menu:
· Wait For Dial Tone: The module will only dial when a dial tone is present on the line
(default).
· Blind Dialing: Allows the module to dial when no dial tone is present.
Monitor Modem Tone (Affects Dialing and Answering)
Tap the On/Off button to Enable (default) or Disable this feature. If enabled the module will
allow audio monitoring of modem tones via the phone input during POTS Codec mode
connections.
Important Notes:
· POTS dial and modem tones are always audible in the left and right sides of the
headphone output when connecting.
· Modem tone monitoring is only enabled during the initial connection training and
negotiation period in POTS Codec mode.
© Tieline Research Pty. Ltd. 2020
Advertisement
Table of Contents
Need help?
Do you have a question about the Tieline ViA and is the answer not in the manual?
Questions and answers