Enabling The Cloud Codec Controller; Configure Fuse-Ip Bonding - Codec Tieline ViA User Manual

272 ViA User Manual v3
33.6

Enabling the Cloud Codec Controller

To allow the codec to be configured and managed by Tieline's Cloud Codec Controller over the
public internet it needs to be enabled for CCC management:
1. Open the HTML5 Toolbox Web-GUI and click Settings at the top of the screen, then click
Options to display the Options panel.
2. Select WebGUI, then click Edit and select the CCC Enabled check-box to enable this
feature.
3. Click Save to store the new configuration.
Important Notes:
· Ensure CSRF is disabled in the codec or it will not be able to connect to the CCC. This
· Locally Defined Codecs over a private network do not need to be enabled for CCC
· The CCC needs to continually send and receive data between codecs to update
33.7

Configure Fuse-IP Bonding

Tieline's proprietary Fuse-IP data aggregation technology uses a point-to-point tunnel between two
codecs to bond multiple IP interfaces (peers). Fuse-IP automatically distributes data over any two
bonded interfaces. IP interfaces from which you can choose to bond include:
· 2 USB modems.
· Built-in Wi-Fi.
· An internal cellular module.
· Dual Ethernet LAN ports.
See Connecting with Fuse-IP
Configuring a Fuse-IP Remote Client
1. Open the HTML5 Toolbox Web-GUI and click Settings and then Fuse-IP.
2. Click the Bonded Interfaces drop-down menu to select the interfaces to be bonded.
setting is [OFF] by default and is also available in the codec menu via Settings >
WebGUI, and in the Options panel in Toolbox.
operation. Only codecs that require internet access need to be enabled.
information displayed. If the CCC is left open on a computer and is not used for more
than 4 hours, the Codec Viewer is placed in 'sleep' mode to save on data use.
for more details on configuration using the codec TOUCH SCREEN.
© Tieline Research Pty. Ltd. 2020