Codec Tieline ViA User Manual page 102

102 ViA User Manual v3
1. Tap a crosspoint on the TOUCH SCREEN to select or deselect an audio crosspoint, or
2. Use the NAVIGATION buttons to focus on a crosspoint and press the OK button to
select or deselect an audio crosspoint.
Any edits take effect immediately in:
1. The Headphone mix accessed by pressing the SOURCE button.
2. The XLR Outputs and Digital Outputs accessed via HOME
/ Digital Outputs
In the following example, the auxiliary input (AUXL and AUXR) have been deselected from the
encoder outputs (ENC1 and ENC2) and have instead been routed to the analog XLR outputs (OUT1
and OUT2). Note: Changes not yet saved as a custom mix are displayed in orange. Runtime
changes are audible in real-time and persist if the unit is powered down and rebooted.
Edits can be saved as a custom mix, which also includes any edits to Headphone, XLR Output,
Digital Output or Cue/TB Mix matrices. To save a custom mix:
1. Tap Menu
2. Enter a new Mix Name and tap Done in the top right-hand corner of the TOUCH
SCREEN.
3. The new custom mix stays loaded in the codec until a new mix is loaded, an
incompatible program is loaded, or program defaults are restored via Menu
Defaults.
.
and then Save as.
> Audio > XLR Outputs
> Reset
© Tieline Research Pty. Ltd. 2020