Codec Tieline ViA User Manual page 338

338 ViA User Manual v3
1. Click the Address Book
Book.
2. Select the interface options to use on local and remote codecs when dialing TieLink
connections. Note: see
Click Next Stream to configure the first audio stream with default algorithm, jitter and FEC
settings which are physically entered in the codec. Alternatively, click Next to specify
individual algorithm, jitter buffer and FEC settings and configure a failover connection or
SmartStream PLUS for this audio stream (recommended).
Click the drop-down arrows on the right-hand side of each text box to adjust the Encoding
Sample rate or Bit rate options.
For IP connections click to configure:
· Auto Jitter Adapt and the preferred auto jitter setting using the drop-down arrow for
Buffer priority. It is also possible to configure the Minimum depth and Maximum
depth of jitter over the connection. See
· Alternatively, select a Fixed Buffer Level and enter the Jitter Depth, which must be
between 12ms and 5000ms depending on the algorithm you select.
button to select a contact to dial from the TieLink Address
Configuring TieLink Settings
Configuring the Jitter Buffer
for more info.
for more details.
© Tieline Research Pty. Ltd. 2020
,