Part 32 Connecting To The Toolbox Web-Gui - Codec Tieline ViA User Manual

224 ViA User Manual v3
1. The ALARM LED flashes until acknowledged, and then turns solid red.
2. Alarm tones are audible in the left headphone output of HP 1-3.
Tap the TOUCH SCREEN or touch any codec controls to acknowledge the alarm and stop the alarm
tones. For more information see
32 Connecting to the ToolBox Web-GUI
There are two graphical user interface (GUI) options for configuring and connecting Tieline G5
codecs:
1. HTML5 Toolbox Web-GUI: fully configure codec settings, create dialing programs and dial,
hangup and monitor connections.
2. HTML5 Toolbox Quick Connect Web-GUI: designed for dialing and managing simple peer-to-
peer connections; ideal for non-technical users.
About the HTML5 Toolbox Web-GUI
The HTML5 Toolbox Web-GUI improves the user experience with G5 codec command and control
and runs seamlessly on modern browsers. The HTML5 Toolbox Web-GUI will run on Mac, Windows
and Linux computers.
About the HTML5 Toolbox Quick Connect
The HTML5 Toolbox Quick Connect Web-GUI has a reduced feature-set and allows non-technical
users to load existing programs and dial via the Quick Connect panel. Users can dial a simple
peer-to-peer connection over POTS, ISDN or IP. By default, the HTML5 Quick Connect panel is
enabled in each codec. To disable this feature:
1. Navigate to Settings in the main HTML5 Toolbox web-GUI and click to open the Options
panel.
2. Navigate to Quick Connect Enabled and deselect the check-box.
Battery Use and Power Management.
© Tieline Research Pty. Ltd. 2020