Codec Tieline ViA User Manual page 260

260 ViA User Manual v3
Manual IPv6 Address Assignment
1. To configure IPv6 address details into the codec manually, select Manually and enter
details into the Address, Prefix and Gateway text boxes.
2. Click Save to store all configuration settings.
Specifying DNS Settings
It is possible to specify Domain Name Server (DNS) settings to allow easy look up of codecs within
the specified DNS Addresses or Domains.
1. Select the DNS tab in the Network panel to configure settings.
2. Click Save to store all configuration settings.
IP Via Mapping
When dialing over IP you can select the preferred interface to use when establishing a connection.
By default Any is selected, which means the first available interface will be used to dial a
connection. The default Via interfaces in order of use when available are:
1. LAN1 Ethernet port (default Primary Via interface)
2. LAN2 Ethernet port (default Secondary Via interface)
3. Internal built-in Wi-Fi (default Tertiary Via interface)
Important Note: VLAN interfaces have features similar to physical Ethernet interfaces.
However, your network administrator will need to configure VLAN support throughout your
network for them to be supported in your codec.
© Tieline Research Pty. Ltd. 2020