Part 27 Record, Playback And Ftp; Record And Manage Audio Files - Codec Tieline ViA User Manual

130 ViA User Manual v3
27 Record, Playback and FTP
The codec supports recording and playing back audio files, including the ability to use the TOUCH
SCREEN to:
· Select and record any input, return audio and file playback audio.
· View and manage recordings.
· Create playlists of local recordings and imported files.
· Control playback routing to specified codec encoders, as well as analog and digital outputs or
record media.
· Use offline playback cue monitoring.
· Record entire programs ready to upload as podcasts.
· Upload audio files using FTP.
To access record and playback functionality, press the HOME
screen, then tap Media
27.1

Record and Manage Audio Files

Checklist Before Recording
Before you start recording:
1. Insert a FAT-formatted SDHC card into the SD CARD SLOT on the rear panel of the codec.
2. Verify enough storage space is available to support the length of time you will be recording.
Note: Storage space remaining is displayed on the Record screen, or tap Menu
Record screen and then tap Storage.
3. Ensure PPM meter levels on the Record screen are not over-modulating or recordings may
be distorted. Note: Ensure recordings are not recorded at very low audio levels or there may
not be enough gain on playback. Aim for audio peaks to average around the first orange
PPM indications on the screen, as displayed in the following image.
Important Notes:
· The ViA codec supports SDHC cards which have a physical capacity of up to 32GB.
· The codec supports using SD cards with a write speed of 2MB/second or higher.
· The maximum file size that can be recorded is 2GB. Note: Recording will stop when the
file size reaches 2GB.
to view record and playback options.
Record and Playback Options Screen
button to return to the Home
© Tieline Research Pty. Ltd. 2020
on the