Codec Tieline ViA User Manual page 66

66 ViA User Manual v3
6. Tap Bonded Interfaces and then tap the On/Off button for the interfaces you want to bond.
Next, tap Save in the top-right hand corner of the TOUCH SCREEN.
7. Leave the default Fuse-IP Port as 8999 in most situations unless this port is already in use, e.g.
you have multiple codecs behind a firewall using Fuse-IP, therefore you need to allocate a
different port for each Fuse-IP tunnel. Note: the port number on the client and server codecs
must be the same.
8. Tap Inactivity Timeout if you want to turn the Fuse-IP tunnel off after a predetermined time
period to save data, then click Save. Note: Inactivity Timeout can be configured from 0 to 1440
minutes. Enter 0 to disable the timeout.
9. Tap Fuse-IP to create a Fuse-IP tunnel between the server and client codecs. The Fuse-IP
symbol is displayed in the Status Bar to confirm the two codecs have created an IP tunnel.
Remember Fuse-IP must be enabled on both codecs. Please note: double-check all settings on
both the server and client codecs if the message Started, dialing server... persists after
turning Fuse-IP On.
© Tieline Research Pty. Ltd. 2020