Table of Contents
Advertisement
2. Tap Transport Interfaces to expand the menu if it is not displayed, then tap Fuse-IP
configure module settings.
3. Configure the Fuse-IP Mode as Client.
4. Tap Server Address to enter a public static IP address associated with the bonded interfaces at
the studio, then tap Done in the top-right hand corner of the TOUCH SCREEN. Note: if the
bonded interfaces have private addresses behind a firewall then port forwarding needs to be
configured. See
5. Tap Server Serial Number and enter the serial number of the server codec to which you are
connecting, then tap Done in the top-right hand corner of the TOUCH SCREEN.
© Tieline Research Pty. Ltd. 2020
Installing the Codec at the Studio
ViA User Manual v3
for more details on port forwarding.
65
to
Advertisement
Table of Contents
Need help?
Do you have a question about the Tieline ViA and is the answer not in the manual?
Questions and answers