Codec Tieline ViA User Manual page 328

328 ViA User Manual v3
delayed based on the ratio of primary packets to FEC packets sent at the selected
setting.
Select Add a SmartStream PLUS Connection to configure redundant IP streaming.
Alternatively, click Next to configure Auto Reconnect or a failover connection, whereby the
alternative connection is dialed if the primary connection fails.
By default, primary IP streaming is via LAN1. To achieve the maximum level of redundancy
select Secondary to configure redundant streaming from the secondary IP port LAN2. The
redundant stream uses Remote Audio Port 9001 by default and the Local Audio Port
allocated is Automatic. Note: Automatic indicates that the codec will arbitrarily allocate the
local port value and send this information to the codec to which you are dialing.
Important Notes:
· SmartStream PLUS redundant streaming over multiple IP interfaces mitigates lost
packets and provides IP network backup if an IP link is lost.
· Only one SmartStream PLUS connection per audio stream is supported with
uncompressed PCM, or when encoding with aptX Enhanced, G.711 or G.722
algorithms.
· Two SmartStream PLUS connections are supported per audio stream with Music PLUS
encoding.
· Up to three SmartStream PLUS connections are supported per audio stream when
encoding using Tieline Music, AAC algorithms, MP2, MP3 and Opus.
· TieLink only supports one SmartStream PLUS redundant connection for each audio
stream. TieLink also does not support uncompressed PCM connections, or encoding
using aptX Enhanced, G.711 or G.722.
· To learn more about SmartStream PLUS visit
For ISDN connections enter a number and select which B channel to use. Select the
Enable bonded connections check-box to configure and bond multiple B channels.
https://tieline.com/smartstream-plus/
© Tieline Research Pty. Ltd. 2020