Codec Tieline ViA User Manual page 38

38 ViA User Manual v3
Helpful Hint: Use fingers on the TOUCH SCREEN to pinch zoom in to web-browser
content, or zoom out.
Connecting over Cellular Wireless via USB Modems
1. Attach a supported USB Modem to either USB PORT 1 or USB PORT 2 on the codec. When
the modem is detected by the codec, the network symbol and signal strength is displayed in the
Status Bar on the TOUCH SCREEN. Note: It may take up to 90 seconds for the modem to be
detected by the codec and connect to the network.
2. From the Home screen tap Settings
Modem to view menus and cellular modem details.
Important Notes:
· Sometimes a cellular network will be detected and a USB modem will connect
automatically after it is inserted. Tieline recommends always using the Overwrite APN
(Access Point Number) menu setting and entering the correct APN for your Telco. This
ensures use of the correct data APN. It is usually simple to search the internet for the
correct APNs used by each Telco. See
details.
· It may be necessary to enter a SIM PIN if the codec cannot connect automatically to
the network.
· To safely remove a USB modem press the HOME
screen, then tap Settings
> Transport Interfaces > Cellular
Adding Access Points and a SIM PIN
> System > Safe Eject
button to return to the Home
.
© Tieline Research Pty. Ltd. 2020
> USB1/2
for more