Codec Tieline ViA User Manual page 394

394 ViA User Manual v3
1. Click the second rule in the Rules panel titled Use a local input to connect/disconnect a
program.
2. Click the drop-down arrows to select the control port input or virtual input used to toggle
connecting and disconnecting a program.
3. Click the drop-down Program arrow to select an individual program which will connect and
disconnect when the input is toggled.
4. Check the Rule summary and click Create Rule to save the settings.
Rule 3: Use a Local Input to Toggle a Remote Output
Use this rule to allow a local codec's control port input or virtual input to change the state of a
remote output.
1. Click the rule in the Rules panel titled Use a local input to toggle a remote output.
2. Click the drop-down arrow to select the local input used to control a remote output.
3. Check the Rule summary and click Create Rule to save the settings.
Rule 4: Use a Local Input to Toggle a Local Output
Use this rule allow a local control port input or virtual input to change the state of a local relay
output.
1. Click the rule in the Rules panel titled Use a local input to toggle a local output.
2. Click the drop-down arrow to select the local control port input used to control a local control
port output.
© Tieline Research Pty. Ltd. 2020