Codec Tieline ViA User Manual page 393

1. Open the Toolbox HTML5 Web-GUI and click Control in the Menu Bar, then click Rules to
display the Rules panel.
2. Click Add New Rule
3. Click to select the appropriate rule for your requirements.
Rule 1: Use Two Local Inputs to Connect/Disconnect a Program
This rule is used to connect and disconnect a selected program when different codec control port
inputs or virtual inputs are activated.
1. Click the first rule in the Rules panel titled Use two local inputs to connect/disconnect a
program.
2. Click the drop-down arrows to select the control port input used to connect the selected
program, and then select the alternative input used to disconnect the program.
3. Click the drop-down Program arrow to select the program to be connected.
4. Check the Rule Summary and click Create Rule to save the settings.
Rule 2: Use a Local Input to Connect/Disconnect a Program
This rule is used to connect and disconnect a selected program when a control port or virtual input
is toggled.
© Tieline Research Pty. Ltd. 2020
ViA User Manual v3 393