Table of Contents
Advertisement
3. Tap SIP1 to configure the first available SIP interface.
4. Tap to select and edit any setting, then tap to select the Via, i.e. the interface used to dial over
SIP1 or SIP2.
5. Tap STUN Server to enter server details if using STUN (Session Traversal of User Datagram
Protocol). Note: UDP Port 3478 is the default port assigned.
6. The NAT Type used by the firewall is displayed after STUN has been configured and the
interface has been enabled.
© Tieline Research Pty. Ltd. 2020
ViA User Manual v3
165
Advertisement
Table of Contents
Need help?
Do you have a question about the Tieline ViA and is the answer not in the manual?
Questions and answers