Part 12 Wireless Ip Connection Options - Codec Tieline ViA User Manual

12 Wireless IP Connection Options
The codec has multiple IP interface connection options, including:
1. LAN1 Ethernet port (default Primary Via interface)
2. LAN2 Ethernet port (default Secondary Via interface)
3. Internal Wi-Fi (default Tertiary Via interface)
4. External USB PORT 1. Note: for use with a USB modem or tethered smartphone.
5. External USB PORT 2. Note: for use with a USB modem or tethered smartphone.
6. Optional Internal Single SIM LTE Module. Note: two antennas are shipped with this module to
support diversity.
7. Optional Internal Dual Active SIM LTE Module: Note: Requires firmware v2.20.xx or higher and
four antennas are shipped with this module to support diversity.
For more information about prioritizing the interface used when dialing a connection see
Via Interfaces.
Connecting a Wi-Fi Access Point
To connect the codec to a Wi-Fi network access point:
1. Press the HOME
2. Tap to select Transport Interfaces and then tap Wi-Fi
3. Ensure the Wi-Fi State is Enabled and tap Rescan Access Points if the required Wi-Fi
network is not populated in the access point list.
© Tieline Research Pty. Ltd. 2020
button to return to the Home screen, then tap Settings
ViA User Manual v3
Configuring
.
.
35