Codec Tieline ViA User Manual page 344

344 ViA User Manual v3
2. This audio stream connection in the wizard will allow the codec to dial and connect the second
audio stream. Enter the name of the connection in the text box, then click Next.
3. Continue through the steps in the wizard to complete configuration in the same way as the first
peer-to-peer connection was configured. Then configure the third audio stream and click Save to
save all program settings, then click Finish to exit the wizard, or Load to load the program.
Important Notes:
· Session Port 9002 and Remote Audio Port 9010 are used by default for the second
IP connection. Session Port 9002 and Remote Audio Port 9020 are used by default
for the third IP connection.
· If you connect to a G3 codec using IP2 it is necessary to change the session port on
the answering codec to 9012 for the second audio stream connection, as this is used
by default on G3 codecs for IP2.
4. The newly created program can be loaded from within the Program Manager panel and
Connections panel.
panel, or dial the program manually
Select and connect audio streams
using the codec front panel.
in a program using the Connections
© Tieline Research Pty. Ltd. 2020