Configuring Snmp Settings - Codec Tieline Gateway User Manual

266 Gateway and Gateway 4 Manual v1.2
Restoring Data from a Backup File
1. Insert a single partition FAT 32 formatted SD card with a backup .tgz file into the SD CARD
SLOT on the front of the codec.
2. Press the SETTINGS
3. Use the navigation buttons to select Reset & Backup and press the
4. Select Restore Settings and press the
5. Select the preferred restore option and press the
6. Select the file to restore and press the
7. A dialog confirms data has been restored successfully.
24.17

Configuring SNMP Settings

The codec supports Simple Network Management Protocol (SNMP) for managing devices on IP
networks. To configure SNMP settings:
1. Press the SETTINGS
2. Use the navigation buttons to select IP Options and press the
3. Navigate to SNMP and press the
4. Navigate to each setting in turn and press the
button.
button.
button.
button.
button.
button.
button to adjust and save each new setting.
button.
button.
© Tieline Research Pty. Ltd. 2021