Pots Answering Configuration - Codec Tieline ViA User Manual

29.2

POTS Answering Configuration

POTS answering can be configured to suit:
· The type of call being made, e.g. Tieline (with Tieline Session Data) versus non-Tieline
(Sessionless).
· Expected dialing behaviors and encoding, e.g. whether audio streams use Route tags and
which algorithm is used.
By default, Tieline codecs communicate information via session data transferred when a connection
is established. If you answer a call from a non-Tieline codec (or a sessionless call from a Tieline
codec), POTS Answering settings determine the algorithm used when connecting. An Answering
Route can also be configured, which routes a call to a specific audio stream on the answering
codec.
Important Notes:
· POTS Answering settings are applied to POTS Codec connections and not Analog
Phone connections.
· When call is received from a Tieline codec sending session data (i.e. not a
Sessionless connection), the algorithm setting sent from the dialing codec overrides
the algorithm setting in the POTS Answering menu.
· The default POTS Answering settings will accept a call from an incoming Tieline codec
with session data enabled, or a sessionless call from a Comrex POTS codec using the
Other algorithm.
· For more information about POTS answering parameters, including 'route' configuration,
see
1. Press the HOME
2. Navigate to Answering and then tap POTS Answering
3. Tap Session Type to adjust whether to accept Tieline session calls or sessionless calls only.
4. Tap to select Tieline Codecs and Sessionless or Sessionless Only if connecting to non-
Tieline codecs only.
© Tieline Research Pty. Ltd. 2020
Configuring POTS Answering
button to return to the Home screen, then tap Settings
in the HTML5 Toolbox Web-GUI manual.
.
ViA User Manual v3
.
157