Headphone Matrix Editing - Codec Tieline ViA User Manual

374 ViA User Manual v3
3. To delete a custom mix, click to select a custom mix and then click Delete. Note: A loaded
mix cannot be deleted.

33.24 Headphone Matrix Editing

The Headphones panel in the HTML5 Toolbox allows the customization of audio source
monitoring for each headphone output. The send/return balance between incoming and outgoing
audio sources can also be adjusted.
The mix displayed for Headphone 1-3 in the panel is reflected in the loaded mix in the Matrix
Editor. If you create custom headphone mixes and load them, and then save all routing in the
Matrix Editor as a custom matrix, all the custom headphone mixes and their Send/Return
balance settings are also saved. In essence, custom headphone mixes are "attached" to a Matrix
Editor matrix when it is saved. This is displayed in the codec as per the following image. In this
example, "Basketball" is the name of the custom Matrix Editor matrix and "Glenn mix" is the
name of the custom headphone mix attached to this matrix.
Important Notes:
· If a custom headphone mix is saved with a custom matrix and the headphone mix is
subsequently deleted, the custom headphone mix settings are retained in the saved
custom matrix.
· Individual headphone source level adjustments for each headphone output are not saved
with a Matrix Editor custom matrix. These individual source levels are accessed by
swiping left in the Headphone Mix view on the TOUCH SCREEN.
Adjusting the Headphone Mix
To adjust settings open the HTML5 Toolbox Web-GUI and
Headphones to open the Headphones panel. In the following image the default stereo matrix is
loaded in the codec and the headphone matrix reflects this routing configuration. This is indicated by
the Loaded Configuration at the top of the panel.
click
Audio in the Menu Bar, then click
© Tieline Research Pty. Ltd. 2020