Codec Tieline ViA User Manual page 358

358 ViA User Manual v3
information can not be used for SIP connections because Tieline session data is replaced by SDP
for SIP connections.
5. This audio stream connection in the wizard will allow the codec to dial. Enter the name of
the connection in the text box, then click Next.
6. Configure the transport settings for the connection: Ensure that you select:
· IP as the Transport.
· SIP from the Session Protocol menu option.
Then click Next.
7. Configure the destination codec Address if you are dialing peer-to-peer, then specify the
network interface used to dial the connection, e.g. Primary (LAN port 1). Enter the name of
a registered SIP account if you are using a SIP server to establish a connection. Use the
format accountname@sipserverdomain, e.g.
At this point you can click Save Program and save the program with default algorithm and jitter
settings. Alternatively, click Next to confirm and specify algorithm and jitter settings for this
connection and configure backup audio settings (recommended).
Important Notes:
· Enter the IP address or SIP URI, then a full colon and the session port number to
change the session port from the default setting 5060.
tieline_test1@getonsip.com
© Tieline Research Pty. Ltd. 2020