Codec Tieline ViA User Manual page 37

Important Note: ViA supports IEEE 802.11 a/b/g/n Wi-Fi with dual band connectivity (2.4
and 5 GHz). For increased security Tieline has implemented the WPA2-PSK
authentication protocol because standard WEP encryption is less secure.
Wi-Fi Indications
The following Wi-Fi indications are displayed in the Status Bar on the codec screen.
Symbol
1 No symbol
displayed
2
3
Browser Wi-Fi Login
Some Wi-Fi networks require a browser to log in and connect to the access point, e.g. hotel Wi-Fi
networks. To log in to this type of network:
1. Press the HOME
Transport Interfaces > Wi-Fi
2. Tap to select the network to which you are connecting.
3. Tap to select Portal Browser to launch a web-browser on the TOUCH SCREEN. Then enter
credentials and/or accept terms as required in the web-browser.
© Tieline Research Pty. Ltd. 2020
Description of Status
Wi-Fi is disabled in the codec
· Wi-Fi is enabled in the codec, but it is out of range of a Wi-Fi network, or
· The codec is within range of a Wi-Fi network, but is either not connected
or is in the process of connecting
The codec is connected to a Wi-Fi network and signal strength is displayed
button to return to the Home screen, then tap Settings
.
ViA User Manual v3 37
>