Upgrading Firmware Via Sd Card - Codec Tieline ViA User Manual

218 ViA User Manual v3

31.22 Upgrading Firmware via SD Card

To download the latest codec firmware visit www.tieline.com. Copy the firmware file onto a USB
stick and then use the following procedure to perform a firmware upgrade. Note: A single partition
FAT32 formatted SD card must be used. To safely remove an SD card after the upgrade, press the
HOME button to return to the Home screen, then tap Settings
1. Insert an SD card with the latest firmware into the SD card slot on the rear panel of the
codec.
2. Press the HOME
3. Swipe up and tap to expand the About & Firmware menu, then tap Firmware
4. Navigate to the firmware file on the SD card, then press the
5. Tap to confirm and commence the firmware upgrade. IMPORTANT: The codec will reboot
automatically after the firmware upgrade. DO NOT remove power or reboot the codec before
the update has completed and the codec has rebooted itself.
6. Safely remove the SD card from the codec after performing the upgrade. From the Home
screen tap Settings
Important Note: We recommend clearing your browser cache after the upgrade is
complete when using the HTML5 Toolbox web-browser GUI to control codec functions.
The short cuts for this are:
button to return to the Home screen, then tap Settings
> System > Safe Eject
· Google Chrome: shift+Ctrl+delete
· Mozilla Firefox: Ctrl+shift+delete
· Internet Explorer: Ctrl+shift+delete
· Safari: Ctrl+alt+e
> System > Safe Eject
button.
.
© Tieline Research Pty. Ltd. 2020
.
.
.