Analog Inputs - Siemens Synco 700 RMZ785 Basic Documentation

Setting values
Notes
Siemens
Building Technologies
5.2

Analog inputs

See Section 5.1.1 for activating analog inputs.
You can enter the following settings for analog inputs: Type, Measured range,
Correction.
5.2.1 Type
You can select "Type" if the unit is °C (identifier °C and outside temperature). The
following types are available:
Ni1000*
2xNi1000*
T1
Pt1000
DC 0...10 V
* Physically, the sensing element types LG-Ni1000, 2x LG-Ni1000 must be used (see Section 5.2.2).
Main menu > Commissioning > Settings > .... or
Main menu > Settings > Inputs > ...X...
Operating line
Type
 If the unit is not °C, the "Type" is always DC 0...10 V.
 Physically, the sensing element types LG-Ni1000, 2x LG-Ni1000 must be used
(see Section 5.2.2).
Switching and monitoring device RMS705B
Inputs
Range
Ni1000, 2xNi1000, T1,
Pt1000, 0...10 V
Factory setting
Ni1000
31 / 216
CE1P3124en
01.04.2010