Siemens Synco 700 RMZ785 Basic Documentation page 132

Setting values
Display values
Wiring test
Siemens
Building Technologies
9.2.3 Assign texts
You can assign a text to the enthalpy calculator block.
Main menu > Commissioning > Settings > .... or
Main menu > Settings > Signal converter > Enthalpy calculator >
Operating line
Enthalpy calculator
See Section 16.4 "Editable texts RMS705B" for an overview of all editable texts
and on how to reset them.
9.2.4 Function check / wiring test
The inputs and outputs of the enthalpy calculator are displayed on the operator
unit.
Main menu > Signal converter > Enthalpy calculator >
Operating line
Enthalpy A
Absolute humidity A
Dew point
Wet bulb temperature
Enthalpy B
Absolute humidity B
Enthalpy difference
Temperature input A
Relative humidity input A
Temperature input B
Relative humidity input B
You can directly control the enthalpy calculator during the wiring test.
Main menu > Commissioning > Wiring test > Outputs >
Operating line
Enthalpy A
Absolute humidity A
Dew point
Wet bulb temperature
Enthalpy B
Absolute humidity B
Enthalpy difference
Switching and monitoring device RMS705B
Signal converter
Range
Max. 20 characters
Comment
---, kJ/kg
---, g/kg
---, °C
---, °C
---, kJ/kg
---, g/kg
---, kJ/kg
---, °C
---, %
---, °C
---,%
Comment
---, 0...100 %
---, 0...100 %
---, 0...100 %
---, 0...100 %
---, 0...100 %
---, 0...100 %
---, 0...100 %
Factory setting
133 / 216
CE1P3124en
01.04.2010