Analog Inputs - Siemens ACCESS 9340 Reference Manual

ACCESS 9340 and 9360 Meters
Chapter 5—Input/Output Capabilities

Analog Inputs

EN–68
With a 9340-60-I/O2222 option module installed, a meter can accept
either voltage or current signals through the analog inputs on the
option module. The meter stores a minimum and a maximum value
for each analog input.
For technical specifications and instructions on installing and
configuring the analog inputs on the 9340-60-I/O2222, refer to the
instruction bulletin (PMIM-IOMOD-0208) that ships with the option
module. To set up an analog input, you must first set it up from the
display. From the SUMMARY screen, select MAINT > SETUP > I/O,
then select the appropriate analog input option. Then, define the
values for each analog input using ION Setup. For instructions on
setting up analog inputs in ION Setup, the ION Setup online Help.
© 2008 Siemens Energy & Automation, Inc. All Rights Reserved.
PMCM-9340D-0208
2/2008