Important Notes - Siemens Synco 700 RMZ785 Basic Documentation

Field of use
Intended use
Electrical installation
Commissioning
Operation
Wiring
Storage and transport
Maintenance
Faults
Disposal
Siemens
Building Technologies
1.8

Important notes

This symbol draws your attention to special safety notes and warnings. Failure to
observe such notes may result in personal injury and/or considerable damage to
property.
Synco™ 700 products may only be used for control and supervision of heating,
ventilation, air conditioning and chilled water plants.
Proper transport, installation and commissioning as well as correct operation are
prerequisite for flawless and safe operation of Synco™ 700 products.
Fuses, switches, wiring and earthing must comply with local safety regulations for
electrical installations.
Only qualified staff trained by Siemens Switzerland Ltd may prepare for use and
commission Synco™ 700 products.
Synco™ 700 products may only be operated by staff instructed by Siemens
Switzerland Ltd or its delegates and who understand the potential risks.
When wiring the system, strictly segregate the AC 230 V section from the AC 24 V
safety extra-low voltage (SELV) section to ensure protection against electric shock
hazard!
Refer to the environmental conditions specified in the respective data sheets for
storage and transport.
If in doubt, contact your supplier or Siemens Switzerland Ltd.
Synco™ 700 products are maintenance-free and only require regular cleaning.
Keep free of dust and dirt any system sections in the control panel whenever
normal service visits are due.
Call service staff responsible for your plant in case of system faults; do not
diagnose and correct faults.
Only authorized staff are permitted to diagnostics, correct faults and restart the
plant. This applies as well to work carried out within the panel (e.g. safety checks
or replacement of fuses).
Do not dispose of the products as domestic waste as they contain electrical and
electronic components.
Observe all local, applicable laws.
Switching and monitoring device RMS705B
Overview
13 / 216
CE1P3124en
01.04.2010