Main Menu - Data Readouts 2 - Group - Danfoss VLT DriveMotor FCP 106 Programming Manual

Parameters

4.14 Main Menu - Data Readouts 2 - Group

18
Parameters in this group are array parameters, where up to
10 fault logs can be viewed. [0] is the most recent logged
data, and [9] is the oldest. Fault codes, values, and time
stamp can be viewed for all logged data.
4.14.1 18-1* Fire Mode Log
18-10 FireMode Log:Event
Range: Function:
0 [0 - 255 ] View fire mode event.
*
4.14.2 18-5* Ref. & Feedb.
18-50 Sensorless Readout [unit]
Range:
0 Sensor- [-999999.999 -
lessUnit 999999.999
*
SensorlessUnit]
18-51 Memory Module Warning Reason
Range: Function:
0 [0 - 0xFFFFFFFFUL ] View the reason for the memory
*
module warning.
18-52 Memory Module ID
Range: Function:
0 [0 - 0 ] View the ID number of the memory module.
*
18-53 Memory Module Function
Option: Function:
Disable or enable the memory module function.
[0] Disabled No data transferring between the memory
module and frequency converter. The frequency
converter cannot use the dongle file in the
memory module.
[1] Enabled The memory module function is enabled.
*
MG03N202
Programming Guide
Function:
View the pressure or flow
resulting from the sensorless
calculations. This value is not the
value used for control. The value
is only updated if sensorless data
supports both flow and pressure.
Danfoss A/S © 11/2015 All rights reserved.
4 4
101