Danfoss VLT DriveMotor FCP 106 Programming Manual page 90

Parameters
13-52 SL Controller Action
Array [20]
Option:
[18] Select ramp 1
[19] Select ramp 2
4 4
[22] Run
[23] Run reverse
[24] Stop
[25] Qstop
[26] DC Brake
[27] Coast
[28] Freeze output
[29] Start timer 0
[30] Start timer 1
[31] Start timer 2
[32] Set digital out
A low
[33] Set digital out
B low
[34] Set digital out
C low
[35] Set digital out
D low
[38] Set digital out
A high
[39] Set digital out
B high
[40] Set digital out
C high
[41] Set digital out
D high
[60] Reset Counter
A
[61] Reset Counter
B
88
®
VLT DriveMotor FCP 106/FCM 106
Function:
coming from either the digital inputs or
via a fieldbus.
Selects ramp 1.
Selects ramp 2.
Issues a start command to the frequency
converter.
Issues a start reverse command to the
frequency converter.
Issues a stop command to the frequency
converter.
Issues a quick stop command to the
frequency converter.
Issues a DC stop command to the
frequency converter.
The frequency converter coasts
immediately. All stop commands including
the coast command stop the SLC.
Freezes the output frequency of the
frequency converter.
Starts timer 0, see parameter 13-20 SL
Controller Timer for further description.
Starts timer 1, see parameter 13-20 SL
Controller Timer for further description.
Starts timer 2, see parameter 13-20 SL
Controller Timer for further description.
Any output with digital output 1selected is
low (off).
Any output with digital output 2 selected
is low (off).
Any output with digital output 3 selected
is low (off).
Any output with digital output 4 selected
is low (off).
Any output with digital output 1 selected
is high (closed).
Any output with digital output 2 selected
is high (closed).
Any output with digital output 3 selected
is high (closed).
Any output with digital output 4 selected
is high (closed).
Resets counter A to 0.
Resets counter B to 0.
Danfoss A/S © 11/2015 All rights reserved.
13-52 SL Controller Action
Array [20]
Option: Function:
[70] Start Timer 3 Starts timer 3, see parameter 13-20 SL
Controller Timer for further description.
[71] Start Timer 4 Starts timer 4, see parameter 13-20 SL
Controller Timer for further description.
[72] Start Timer 5 Starts timer 5, see parameter 13-20 SL
Controller Timer for further description.
[73] Start Timer 6 Starts timer 6, see parameter 13-20 SL
Controller Timer for further description.
[74] Start Timer 7 Starts timer 7, see parameter 13-20 SL
Controller Timer for further description.
MG03N202