Danfoss VLT DriveMotor FCP 106 Programming Manual page 78

Parameters
4.8.8 8-9* Bus Feedback
8-90 Bus Jog 1 Speed
Range:
100 RPM [ 0 - 1500
*
RPM]
4 4
8-91 Bus Jog 2 Speed
Range:
200 RPM [ 0 - 1500
*
RPM]
8-94 Bus Feedback 1
Range:
0 [-32768 -
*
32767 ]
76
VLT
Function:
Enter the jog speed. Activate this
fixed jog speed via the serial port or
fieldbus option.
Function:
Enter the jog speed. Activate this
fixed jog speed via the serial port or
fieldbus option.
Function:
Write feedback to this parameter via the serial
communication port. Select this parameter in
parameter 20-00 Feedback 1 Source or
parameter 20-03 Feedback 2 Source as a feedback
source. Hex-value 4000 h corresponds to 100%
feedback/range is ±200%.
Danfoss A/S © 11/2015 All rights reserved.
®
DriveMotor FCP 106/FCM 106
MG03N202