Danfoss VLT DriveMotor FCP 106 Programming Manual page 83

Parameters
9-80 Defined Parameters (1)
Range: Function:
0 [0 - 9999 ] This parameter shows a list of all the defined
*
frequency converter parameters available for
PROFIBUS.
9-81 Defined Parameters (2)
Range: Function:
0 [0 - 9999 ] This parameter shows a list of all the defined
*
frequency converter parameters available for
PROFIBUS.
9-82 Defined Parameters (3)
Range: Function:
0 [0 - 9999 ] This parameter shows a list of all the defined
*
frequency converter parameters available for
PROFIBUS.
9-83 Defined Parameters (4)
Range: Function:
0 [0 - 9999 ] This parameter shows a list of all the defined
*
frequency converter parameters available for
PROFIBUS.
9-84 Defined Parameters (5)
Range: Function:
0 [0 - 9999 ] This parameter shows a list of all the defined
*
frequency converter parameters available for
PROFIBUS.
9-85 Defined Parameters (6)
Range: Function:
0 [0 - 9999 ] This parameter shows a list of all the defined
*
frequency converter parameters available for
PROFIBUS.
9-90 Changed Parameters (1)
Range: Function:
0 [0 - 9999 ] This parameter shows a list of all the frequency
*
converter parameters deviating from default
setting.
9-91 Changed Parameters (2)
Range: Function:
0 [0 - 9999 ] This parameter shows a list of all the frequency
*
converter parameters deviating from default
setting.
9-92 Changed Parameters (3)
Range: Function:
0 [0 - 9999 ] This parameter shows a list of all the frequency
*
converter parameters deviating from default
setting.
MG03N202
Programming Guide
9-93 Changed Parameters (4)
Range:
0 [0 - 9999 ] This parameter shows a list of all the frequency
*
9-94 Changed Parameters (5)
Range:
0 [0 - 9999 ] This parameter shows a list of all the frequency
*
9-99 Profibus Revision Counter
Range:
0 [0 - 65535 ]
*
Danfoss A/S © 11/2015 All rights reserved.
Function:
converter parameters deviating from default
setting.
Function:
converter parameters deviating from default
setting.
Function:
Readout of revision count.
4 4
81