Ems Function On The Lcd Screen - Delta DPS Series User Manual

No. Item
Multifunctional
8 Communication
Card (MFC)
NOTE:
For installation and operation details, please refer to the Quick Guide or User
Manual included in the package of the optional accessory. To purchase any
accessory mentioned above, please contact your local dealer or customer service.
8.1

EMS Function on the LCD Screen

 Path 1: Tap the shortcut button (
Path 2:
The UPS can display the information of the optional EMS 1000 (EnviroProbe) on the EMS
screen. To activate it, please connect the EMS 1000 (EnviroProbe) with the UPS and
complete relevant settings.
NOTE:
1. The EMS screen is related to the settings shown in
settings can be adjusted according to your needs.
2. For installation of the optional EMS 1000 (EnviroProbe), please refer to the
instructions below and the EnviroProbe 1000 Quick Guide included in its
package.
If you use the Delta lithium-ion batteries, you must purchase
and install the multifunctional communication card (MFC) in
the SMART slot shown in Figure 4-1 to monitor the battery
status via the UPS's LCD. For relevant information, please
refer to 8.3 MFC Function on the LCD Screen. Please
contact Delta customer service if you need more information.
NOTE:
For parallel UPSs, you must install one
multifunctional communication card (MFC) in each
parallel UPS if you use the Delta lithium-ion
batteries.
) on the Main Screen.
→ EMS
Function
125
→ EMS Setting. The